One-part silicone potting compound
Product Description:
One-part silicone potting compound is room temperature curing neutralsilicone material, low viscosity, self-leveling, cured elastomer. Resistant tohigh and low temperatures, with excellent aging resistance, flexibility,insulation, moisture, shock, corona resistance and resistance to leakage.Suitable for small or thin layers (potting thickness less than 7MM) ofelectronic components, circuit boards, sensors, relays and other pottingprotection.
592T SiliconeRubber Sealant
Deoxime type, transparent, potting of various electronic components.
592B SiliconeRubber Sealant
Deoxime type, black color, potting of electronic components such aslight emitting diodes.
592W SiliconeRubber Sealant
Deoxime type, white colour, potting of electronic components such aselectrical modules.
582 SiliconeRubber Sealant
Dehydrated, transparent, non-corrosive to polycarbonate (PC), copper andother materials, potting of various electronic components.
Performance parameters:
|
Performance indicators |
592T |
592B |
592W |
592 |
|
Appearances |
Transparent Fluid |
Black fluid |
White fluid |
By choice |
|
Densities（g/mm3，） |
1.0 |
1.1 |
1.1 |
1.0 |
|
Viscosity（pa.s） |
6~10 |
8~15 |
8~15 |
6~10 |
|
Surface drying time (min) |
10~30 |
10~30 |
10~30 |
5~20 |
|
Tensile strength (MPa) |
0.8 |
1.0 |
1.0 |
0.7 |
|
Elongation (%) |
200~300 |
200~300 |
200~300 |
150~200 |
|
Hardness (shore A) |
20~30 |
20~30 |
20~30 |
15~25 |
|
Shearing strength (MPa) |
≥0.5 |
≥0.5 |
≥0.5 |
≥0.5 |
|
Dielectric strength (kv/mm) |
≥20 |
≥20 |
≥20 |
≥20 |
|
Loss factor (1.2MHz) |
0.001 |
0.001 |
0.001 |
0.001 |
|
Volume resistance (Ω·cm，25℃) |
1.0×1015 |
|||
|
Working temperature range (℃) |
-60~250 |
-60~250 |
-60~250 |
-60~250 |
|
Wire shrinkage (%) |
0.3 |
0.3 |
0.3 |
0.3 |
Operation process:
1. Clean the surface: the surface of the potting object will be clean,remove rust, dust, moisture and oil.
2. Sizing: unscrew the hose cap, and prick open the sealing mouth, theglue will be squeezed to the surface has been cleaned up, so that the naturalleveling.
3. Curing: the glue absorbs moisture in the air, the surface begins tosolidify, gradually to the deep curing, in 24 hours (room temperature and 60%relative humidity) within the curing depth of 3 ~ 4mm.
4. Summer temperature is high, high humidity, curing will be faster;winter temperature is low, low humidity, curing will be slower.
Packing:
(1) Toothpaste tube: 100ml/tube, 100 tubes/box.
(2) Hard packing: 310ml/piece, 50pcs/carton.
(3) Plastic drum: 2600ml/drum, 6 drums/carton.
Notes:
Silicone rubber absorbs moisture and cures, unused rubber should besealed and stored. Sealed storage in a cool dry place, storage period of 9months.
